3Com 10014299 PIM-DM Configuration, Receiver 2 are the two receivers of this multicast group

514 CHAPTER 35: CONFIGURING PIM-DM
	Turn on the switch of PIM-DM debugging	debugging pim dm { alert all mrt
	information	timer warning { recv send } {
		all assert graft graft-ack
		join prune } }

After making the previous configuration, execute the display command in all views to display the running of the PIM-DM configuration, and to verify the effect of the configuration. Execute the debugging command in system view to debug PIM-DM.

PIM-DM Configuration	In this example, the multicast source server is the multicast source, while RECEIVER
Example	1 and RECEIVER 2 are the two receivers of this multicast group.
	Figure 163 PIM-DM configuration and networking

	Router
	RECEIVER 1
Multicast	Router
source	Router
	RECEIVER 2

1Enable multicast routing protocol

[Router] multicast routing-enable

2Enable PIM-DM protocol

[Router] interface Ethernet 0 [Router-Ethernet0] pim dm

[Router-Ethernet0] interface serial 0 [Router-Serial0] pim dm

[Router-Serial0]interface serial 1

[Router-Serial1] pim dm