Configuring a Modem 753

Perform the following configuration in interface (asynchronous serial, AUX or AM interface) view.

Table 781 Specify the Events Triggering the Modem Scripts

Operation

Command

 

 

Specify the automatically executed modem

script trigger login script-name

script when the calling-out connection is set

 

up successfully.

 

 

 

Specify the automatically executed modem

script trigger connect script-name

script when the calling-in connection is set up

 

successfully.

 

 

 

Specify the automatically executed modem

script trigger dial script-name

script before DCC dialing.

 

 

 

Specify the automatically executed modem

script trigger logout script-name

script at the time of line reset.

 

 

 

Specify the automatically executed modem

script trigger init script-name

script at the time of system power-on and

 

restart.

 

 

 

Specify the default modem initialization string

script init-string init-string

for initializing modem.

 

 

 

The argument following the script init-stringcommand is the initialization string rather than the modem script name.

Configure the Modem This configuration depends on whether the external modem to which the Answer Mode asynchronous interface is connected is in auto-answer mode (whether the AA LED

on the modem is on). If the modem is in auto-answer mode, the user should execute modem-autoanswerbefore using the dial function. If not, the user should execute undo modem-autoanswer. Inconsistency of the configuration and the modem status may cause the abnormal acceptance of some modem incoming calls.

Perform the following configuration in interface (asynchronous serial, AUX or AM interface) view.

Table 782 Configure the Answer Mode for the Modem

Operation

Command

 

 

Configure the modem to work in

modem auto-answer

auto-answer mode

 

 

 

Configure the modem to work in

undo modem auto-answer

non-auto answer mode

 

 

 

Configure Authentication for a Modem Dial-in User

By default, the modem works in non-auto answer mode.

The command modem-loginis configured to authenticate the name and password of the dial-in user. Generally this command is used together with the command of script trigger connect, thus many usernames can login at the same interface.

Perform the following configuration in interface (asynchronous serial, AUX or AM interface) view.

Page 757
Image 757
3Com 10014299 manual By default, the modem works in non-auto answer mode, Specify the Events Triggering the Modem Scripts