3Com 10014299 manual User Identity, Management, Can enter all views, Following commands

26 CHAPTER 2: 3COM ROUTER USER INTERFACE

Table 9 Display function table

Operation	Commands or keys
Stop display information on terminal	Press Ctrl+C when display information pauses.
Continue to display information of next	Press Space when display information pauses.
screen page
Continue to display information of next	Press Enter when display information pauses.
line

User Identity	The 3Com Router sets three kinds of router management users: administrator
Management	user, operator user and guest user. Different kinds of users have different rights to
	execute commands.
	1 An administrator user has the right to execute all the commands of the router.
	Only the administrator user can configure all the functions and parameters and
	can enter all views.
	2 An operator user can monitor and maintain the router, they can also obtain the
	debugging information of the router. The operator user can only execute the
	following commands.
	debugging Enable		system debugging functions
	display	Display system running information
	language	Switch	language mode (English)
	logout	logout
	pad	Try to	open a PAD connection
	ping	Send ICMP ECHO_REQUEST packets to network hosts
	reboot	Reboot	the router under certain condition
	reset	Reset operation
	rlogin	Log in	remote UNIX host
	send	Send a	message to other terminals
	telnet	Telnet	to a remote host
	tracert	Trace the route taken by packets to reach a network host
	undo	Cancel	current setting

3A guest user has no right to manage the router, but only has the right to perform a remote test on the router. The guest user can only execute the following commands.

language	Switch language mode (English, Chinese)
logout	logout
pad	Try to open a PAD connection
ping	Send ICMP ECHO_REQUEST packets to network hosts
rlogin	log in remote UNIX host.
telnet	Telnet to a remote host
tracert	Trace the route taken by packets to reach a network host

Please perform the following commands in system view.

Table 10 Configure the user

Operation	Command
Configure a user	local-user user-nameservice-type type [ password {
	simple cipher } password ]
Delete a user	undo local-user user-name