3Com 10014299 manual Map the bridge address to Dlci, Define a dialer list

306 CHAPTER 19: CONFIGURING BRIDGE

Table 343 Map the bridge address to DLCI

Operation	Command
Configure a Frame Relay mapping forwarded to the	fr map bridge dlci broadcast
bridge

11Configure Bridging over BDR

Perform the following configuration in system view. a Define a dialer list

Table 344 Define a dialer list

Operation	Command
Define a dialer list.	dialer-rule dialer-group
	bridge { permit deny }

bConfigure the bridge interface

Perform the following configuration in interface view.

Table 345 Configuration on the interface

Operation	Command
Add the interface to the dialer-group	dialer-group dialer-group
Map the bridge address to BDR	dialer route bridge broadcast
	string

12Configure Bridging over LAPB

Perform the following configuration in interface view.

Table 346 Configure the link layer protocol of the interface to LAPB

Operation	Command
Configure the link layer protocol of the	link-protocol lapb [ dte dce ]
interface to LAPB	[ multi-protocol ]

13Configure Bridging over PPP

Perform the following configuration in interface view.

Table 347 Configure the link layer protocol of the interface to PPP

Operation	Command
Configure the link layer protocol of the interface	link-protocol ppp
to PPP

14Configure Bridging over HDLC

Perform the following configuration in interface view.

Table 348 Configure the link layer protocol of the interface to HDLC

Operation	Command
Configure the link layer protocol of the interface	link-protocol hdlc
to HDLC

15Configure Bridging over VLAN

Perform the following configuration in interface view.