3Com 10014299 Configure retransmission number of LLC2, Configure LLC2 local acknowledgement time

392 CHAPTER 25: CONFIGURING DLSW

Table 448 Configure retransmission number of LLC2

Operation	Command
Configure retransmission number of LLC2	llc2	max-transmission
	retries
Restore the default value of the retransmission number of	undo	llc2
LLC2	max-transmission

By default, the retransmission number of LLC2 is 20.

fConfigure LLC2 Local Acknowledgement Time

LLC2 local acknowledgement time refers to max wait time for waiting for the other part's acknowledgement after sending a piece of LLC2 data message.

Please process the following configurations in the Ethernet interface view.

Table 449 Configure LLC2 local acknowledgement time

Operation	Command
Configure LLC2 Local Acknowledgement Time	llc2 timer ack mseconds
Restore the default value of LLC2 local acknowledgement	undo llc2 timer ack
time

By default, LLC2 local acknowledgement time is 200 ms.

gConfigure BUSY Status Time of LLC2

When it queries the station, LLC2 will wait for the next query if the station is busy.

The interval of re-querying LLC2 Busy station.

Please process the following configurations in the Ethernet interface view.

Table 450 Configure BUSY status time of LLC2

Operation	Command
Configure BUSY status time of LLC2	llc2 timer busy mseconds
Restore the default value of BUSY status time of LLC2	undo llc2 timer busy

By default, BUSY status time of LLC2 is 300 ms.

hConfigure P/F Wait Time of LLC2

P/F wait time of LLC2 refers to duration waiting for correct information frame after sending frame P.

Please process the following configurations in the Ethernet interface view.

Table 451 Configure P/F wait time of LLC2

Operation	Command
Configure P/F wait time of LLC2	llc2 timer poll mseconds
Restore the default value of P/F wait time of LLC2	undo llc2 timer poll

By default, P/F wait time of LLC2 is 5000 ms.

iConfigure REJ Status Time of LLC2

REJ status time of LLC2 refers to duration waiting for correct information frame after refusing frame.

Please process the following configurations in the Ethernet interface view.