3Com 10014299 manual Upgrade the 3Com Router Main Software with FTP, Enable FTP server

Upgrade the 3Com Router Main Program Software 43

remote FTP user sends a request to the FTP server, and the server will perform actions accordingly and return the execution result to the subscriber.

Perform the following configuration in system view.

Table 18 Enable FTP server

Operation	Command
Enables the FTP server	ftp-server enable
Disables the FTP server	undo ftp-server enable

Upgrade the 3Com Router Main Software with FTP

1Assign an IP address to the interface on the router for connecting the router to the host running the FTP client program.

2Using the Windows98 FTP client program as an example — place the file to be uploaded on a specified directory, C:\temp for example, on the FTP client.

3Open the DOS window, enter FTP X.X.X.X (where X.X.X.X represents the IP address of the router), and enter the user name and password as prompted:

C:\WINDOWS>ftp 10.110.27.1

Connected to 10.110.27.1.

220 FTP service ready on the 3Com Router at User (10.110.27.1:(none)): cjj

331 Password required for cjj. Password:

230 User cjj logged in . ftp>

4After the authentication is passed, the FTP client displays the prompt ftp> enter binary after the prompt, and set the upload directory on the FTP client.

ftp> binary

200 Type set to I.

ftp> lcd c:\temp

Local directory now C:\temp.

5At the prompt ftp>, set a directory for the FTP server (the router). By default, the file name of the 3Com Router main program is “system”, which is case sensitive. You can modify the file name using the ftp-serversystem-namecommand on the router. For details, refer to Configure FTP.

ftp> dir
200	Port	command okay.
150	okay.
config		1007	Bytes
system		5802368	Bytes
226	Data	transmit over.

ftp: 76 bytes received in 0.00Seconds 76000.00Kbytes/sec.

6At the prompt ftp>, enter the put LocalFile [ RemoteFile ] command to upload the specified file to the router. RemoteFile must be the name of the system file on the router.

ftp> put 3Com Router 1.71 system 200 Port command okay.

150 Server okay , now receive file.

226 file transmit success.

ftp: 5802263 bytes sent in 80.74Seconds 71.86Kbytes/sec.