3Com 10014299 manual RouterAdebugging ip policy-routing

496CHAPTER 32: CONFIGURING IP POLICY ROUTING

[RouterA]debugging ip policy-routing

IP: s=151.1.1.1(local),d=152.1.1.1, len 64, policy match

IP: route map lab1, item 10, permit

IP: s=151.1.1.1(local),d=152.1.1.1, len 64, policy routed

IP: local to serial 150.1.1.2

On Router A, change the message size to 101 bytes and monitor policy routing with debug ip policy command. Note: the messages of 101 bytes match the entry item whose serial number 20 as shown in the routing diagram lab1. They are sent to 151.1.1.2.

[RouterA]debugging ip policy-routing

IP: s=151.1.1.1(local),d=152.1.1.1, len 101, policy match

IP: route map lab1, item 20, permit

IP: s=151.1.1.1(local),d=152.1.1.1, len 101, 64, policy routed

IP: local to serial 151.1.1.2

On Router A, change the message size to 1001 bytes and monitor policy routing with debug ip policy command. Note that this message does not match any entry item in lab1, so it is forwarded in regular mode.

[RouterA]debugging ip policy-routing

IP:s=151.1.1.1(local),d=152.1.1.1, len 1001, policy rejected-normal forwarding

IP:s=151.1.1.1(local),d=152.1.1.1, len 1001, policy rejected-normal forwarding