3Com 10014299 manual Configuring shaping parameters for all flows, Configure the ACL

676CHAPTER 48: TRAFFIC POLICING, TRAFFIC SHAPING AND LINE RATE

Table 714 Configure Shaping Parameters for a Specified Flow

Operation	Command
Configure the shaping parameters for a	qos gts acl acl-indexcir
specified flow	committed-rate [ cbs burst-size [ ebs
	excess-burst-size [ queue-length
	queue-length ] ] ]
Cancel shaping parameters for a specified	undo qos gts acl acl-index
flow

By default, the traffic shaping is not performed on the interface.

This command may be repeatedly used to set different shaping parameters for different flows.

This command cannot be used together with the qos gts any command in the same interface.

Configuring shaping parameters for all flows

Shaping all the flows means shaping all the flows passing this interface.

Please perform the following settings in the interface view.

Table 715 Configure Shaping Parameters for all Flows

Operation	Command
Configure shaping parameters for all	qos gts any cir committed-rate[ cbs
flows	burst-size [ ebs excess-burst-size [
	queue-length queue-length] ] ]
Cancel the shaping parameters of the flow	undo qos gts any

By default, the traffic shaping is not performed on the interface.

This command cannot be used along with the qos gts acl command on the same interface. You must disable fast forwarding before configuring all the traffic shaping parameters.

Displaying and

Debugging Traffic

Shaping

GTS Configuration Example

Table 716 Display and Debug Traffic Shaping

Operation	Command
Display the GTS configuration conditions	display qos gts [ interface type
and statistic information of the interface	number ]

1Configure the ACL.

[Router]acl 110

[Router-acl-110]rule permit udp source any destination any

Shape the flows matching 110 on Ethernet interface 0.

[Router-acl-110]interface ethernet0

[Router-Ethernet0]qos gts acl 110 cir 2000000 cbs 120000 ebs 120000