NEC MH4500 manual Configuring Your System, Iv Contents

Configuring Your System	3-1
Using the BIOS Setup Utility	3-3
Main Menu	3-4
Advanced Menu	3-6
Security Menu	3-10
Server Menu	3-12
Boot Menu	3-14
Exit Menu	3-16
Using the Symbios SCSI Utility	3-16
Running the Symbios SCSI Utility	3-16
Changing the Adapter and Device Configurations	3-17
Using the Optional RAID Controller	3-20
Factory Installed Controller	3-20
Add-on Controller	3-20
DACCF Configuration Utility	3-21
Configuring System Board Jumpers	3-22
Moving System Board Jumpers	3-23
Resetting the CMOS NVRAM	3-24
Clearing and Changing Passwords	3-24

Upgrading Your System	4-1
Observing Static Precautions	4-2
Preparing Your System for Upgrade	4-3
Preparing the Equipment Log	4-3
Removing the Access Cover	4-4
Installing the Access Cover	4-5
Opening the Subchassis and Electronics Bay	4-6
Closing the Subchassis and Electronics Bay	4-7
Upgrading the System Board	4-8
Replacing the Real-time Clock Battery	4-8
Installing/Removing the Processor Cartridge	4-10
Installing DIMM Modules	4-14
Installing Option Boards	4-19
Installation Considerations	4-20
Controller/Adapter Hardware Configurations	4-21
Installing an Option Board	4-21
Removing an Option Board	4-22
Installing Hard Disk Drives	4-24
Installing an Optional SCSI Hard Disk Drive	4-25
Hot-Swapping a SCSI Hard Disk Drive	4-26
Installing Removable Media Devices	4-27
Installing a 5 1/4-Inch Media Device	4-28
Removing a 5 1/4-Inch Media Device	4-30

Solving Problems	5-1
Static Precautions	5-2
Troubleshooting Checklists	5-2
Initial System Startup	5-3
Running New Application Software	5-4
After System Has Been Running Correctly	5-4

iv Contents