Adapter Setup Screen
Description | Recommended Setting or Display Only | Your Configuration |
SCAM Support | On |
|
Parity | On |
|
Host SCSI ID | 7 |
|
Scan Order | Low to High |
|
Removable Media | None |
|
Support |
|
|
CHS Mapping | SCSI Plug and Play Mapping |
|
Spinup Delay (sec) | 2 |
|
Help |
|
|
Restore Default Setup |
|
|
Exit This Menu |
|
|
|
|
|
3.Highlight the function you want to change and press Enter. You are prompted to save changes when you exit the configuration utility.
To change device configuration parameters, perform the following steps.
1.At the SCSI Configuration Utility Menu, select “Device Selections” and press Enter. The Devices 0 to 7 screen displays.
2.Select the SCSI device you are reconfiguring and press Enter.
If you are configuring SCSI Hard Disk Drives, see the following "SCSI
THard Disk Drives" table.
If you are configuring SCSI Removable Media Devices, see the following "SCSI Removable Media Devices" table for recommended settings.
