NEC MH4500 Console in Redirect State, EMP Access Modes Server Configured for Console Redirect

Console in Redirect State

The above figure shows the EMP window in redirect state with the terminal window. The text that appears on the server monitor displays in the redirect window.

Availability of the various EMP features is determined by two things: the EMP access mode selected during configuration in the System Management Submenu of the BIOS Server Menu, and if the server's COM 2 port is configured for console redirect in BIOS. The three EMP access modes are disabled, pre-boot, and always active.

EMP Access Modes (Server Configured for Console Redirect)

Mode	Server Powered Off	During POST	After OS boots
Disabled	Redirect window appears, but is	Redirect window	Redirect window
	blank
Pre-boot	EMP commands available	Redirect window*	Inactive redirect window
Always	EMP commands available	Redirect window*	EMP commands
Active			available

*The operation mode can be modified by selections in the post reset and post-power-up dialogs. These are server control dialogs available with the EMP.

C-4 Emergency Management Port