
The site must be isolated from strong electromagnetic fields and electrical noise produced by electrical devices such as air conditioners, large fans, large electric motors, radio and TV transmitters, and
Provide at least eight inches (20.32 centimeters) behind the system and three inches (eight centimeters) on each side of the system for proper
Tcooling, airflow, and cable clearance.
Site the system so that it is easily accessible for system maintenance and installation of system upgrades.
With the site selected, unpack and set up the system as described next.
Unpacking the System
!WARNING
Your system weighs approximately 85 pounds (38.25 kg), minimum configuration. If your system contains optional boards and peripheral devices, it may weigh up to 100 pounds (45.4 kg). To avoid personal injury, make sure you have someone help you lift or move the system.
When you receive your system, inspect the shipping carton(s) prior to unpacking. If the shipping carton(s) is damaged, note the damage, and if possible, photograph it for reference.
After removing the contents of the carton(s), inspect for damage. If the contents appear damaged, file a damage claim with the carrier immediately. Keep the cartons and the packing materials.
Check that you have all the parts listed on the packing slip. If any are missing, contact the dealer where you purchased the system.
Set the system where you can easily look at the front and rear. Take a few minutes and become familiar with the system’s controls, indicators, and connectors (see “Getting Familiar with the System,” next).