NEC MH4500 manual Installing DIMMs, Removing the Memory Module, 4-16Upgrading Your System

3.Carefully pull the memory module out of its connector on the system board (see the following figure).

4.Slide the module straight out from the system board until it clears the guide rails.

5.Place the module component-side up on a non-conductive, static-free surface.

Removing the Memory Module

Installing DIMMs

Use the following procedure to install DIMMs. If you need to remove a DIMM, see “Removing DIMMs,” next.

1.Remove the memory module as previously described.

!CAUTION

Install DIMMs with gold-plated edge connectors in the memory module gold-plated sockets. Mixing dissimilar metals might cause memory failures and data corruption.

2.Hold the DIMM by its edges and remove from its antistatic package.

4-16 Upgrading Your System