Advanced Menu
Feature | Choices | Description | Your Setting |
Use Multiprocessor | 1.1 | Selects version of multiprocessor |
|
Specification | 1.4 | specification to use. Some |
|
|
| operating systems require version |
|
|
| 1.1 for compatibility reasons. |
|
Large Disk Access | LBA | Select LBA for IDE drives. |
|
Mode | CHS |
|
|
System Wakeup | Disabled | If enabled, the system powers up |
|
Feature | Enabled | upon receiving a “magic packet” on |
|
|
| LAN, ring on COM2, or PME |
|
|
| interrupt from a PCI board. |
|
Pause Before Boot | Enabled | Enables five second delay before |
|
| Disabled | booting operating system. |
|
Advanced Chipset | Press Enter | Refer to “Advanced Chipset Control |
|
Control |
| Submenu.” |
|
|
|
|
|
PCI Configuration Submenus
The following tables show the settings for the PCI Device Embedded SCSI submenu and PCI Devices submenu. The submenus should only be changed by qualified technical personnel.
!CAUTION
Leave the PCI Device Embedded SCSI submenu at factory- default settings. This submenu should only be changed by qualified technical personnel.
PCI Device, Embedded SCSI Submenu
Feature | Choices | Description | Your Setting |
Option ROM Scan | Enabled | Enables option ROM scan of the |
|
| Disabled | selected device. Used to enable |
|
|
| embedded Symbios SCSI |
|
|
| controller |
|
Enable Master | Enabled | Enabled selects the device as a |
|
| Disabled | PCI bus master. |
|
Latency Timer | Default | Minimum guaranteed time, in units |
|
| 0020h | of PCI bus clocks, that a device |
|
| 0040h | may be master on a PCI bus. |
|
| 0060h | Caution: Do not change this setting |
|
| 0080h | unless you fully understand the |
|
| 00A0h | priority of this device on the PCI |
|
| 00C0h | bus. |
|
| 00E0h |
|
|
Active Termination | Disabled | Selects the setting of the onboard |
|
| SCSI A On |
|
|
Configuring Your System
