Removing/Installing the Access Cover
Installing the Access Cover
Install the access cover as follows.
1.Check that you have not left any tools or loose parts inside the system chassis.
2.Make sure all option boards are firmly seated in their respective slots and that all interior cables are properly connected.
3.Insert the metal tabs on the top and bottom of the access cover into their slots on the chassis. Slide the cover toward the front of the system, as far as it will go.
4.Secure the access cover with the two previously removed retaining screws.
5.Connect any external devices, connect all cables, and plug in the system’s power cables.
Upgrading Your System
