NETGEAR FWG114P v2 manual Set up the Netgear printer port driver

Reference Manual for the ProSafe Wireless 802.11g Firewall/Print Server Model FWG114P v2

Set up the Netgear printer port driver.

a.Click Finish when the Installation Wizard is done.

The Printer Port Setup utility displays, and queries the network to locate the print server in the FWG114P v2.

After a short delay, the Printer Port Setup utility will display the port it finds in the FWG114P v2 print server.

b.Click Add to add this printer port to your computer.

The Printer Port Setup utility will report that Port FWG114P_P1 has been added to the computer.

c.Click Exit to exit the Printer Port Setup utility.

The Windows Add Printer Wizard automatically runs.

Netgear Printer Port Installation Wizard

Note: Under Windows 95, you may receive an error message stating that SETUPAPI.DLL was not found. In this case, you should upgrade your Internet Explorer to version 5 or later.

Netgear Printer Port Setup Utility

Print Server 7-7

201-10301-02, May 2005