NETGEAR manual FWG114P v2 Rear Panel, LED Descriptions

Reference Manual for the ProSafe Wireless 802.11g Firewall/Print Server Model FWG114P v2

Table 2-1.	LED Descriptions
Label		Activity	Description
POWER		On	Power is supplied to the firewall.
TEST		On	The system is initializing.
		Off	The system is ready and running.
PRINTER
ACT		On	The printer is connected and powered on.
		Blinking	Data is being transmitted or received by the Printer port.
ALERT		On (Amber)	The printer has a problem, such as out of paper, out of ink, or a
			paper jam.
MODEM
ACT		Blinking	Data is being transmitted or received by the Modem port.
LINK		On (Amber)	The port has detected a link with an attached device.
INTERNET		Note: The operation of these LEDs depends on how the WAN port is configured.
100 (100 Mbps)		On	The Internet (WAN) port is operating at 100 Mbps.
		Off	The Internet (WAN) port is operating at 10 Mbps.
LINK/ACT		On	The Internet port has detected a link with an attached device.
(Link/Activity)		Blinking	Data is being transmitted or received by the Internet port.
LOCAL
100 (100 Mbps)		On	The Local port is operating at 100 Mbps.
		Off	The Local port is operating at 10 Mbps.
LINK/ACT		On	The Local port has detected a link with an attached device.
(Link/Activity)		Blinking	The Local port is transmitting or receiving data.
WLAN		On	The Wireless (WLAN) port is operating.
		Blinking	The Wireless (WLAN) port is transmitting or receiving data.

The FWG114P v2 Rear Panel

The rear panel of the FWG114P v2 Wireless Firewall/Print Server contains the port connections listed below.

2-8 Introduction

201-10301-02, May 2005