Reference Manual for the ProSafe Wireless 802.11g Firewall/Print Server Model FWG114P v2

Complete the Add Standard TCP/IP Printer Port Wizard.

a.Click Next to proceed with the Add Standard TCP/IP Printer Port Wizard. The Add Port screen will display.

b.From the Add Port screen, enter 192.168.0.1, the FWG114P v2 default LAN IP address, in the IP Address field. Note: If you changed the default LAN IP Address of the FWG114P v2, be sure to use the address you assigned here. The Port Name is automatically filled in.

Click Next to proceed.

c.In the Device Type section of the Additional Port Information Required screen, select Custom.

d.In the Custom selection, click Settings.

e.The Port Settings tab page opens. In the Protocol section, select the LPR radio button, and enter FWG114P as the Queue Name in the LPR Settings section. Click OK to close this tab page.

Click Next to proceed.

The Add Printer Wizard will now prompt you to install the software for the printer you attached to the FWG114P v2.

Add Standard TCP/IP Printer Port Wizard

Add Port Screen

Additional Port Information Required

Additional Port Information Required

Print Server

7-3

201-10301-02, May 2005

Page 99
Image 99
NETGEAR FWG114P v2 manual Complete the Add Standard TCP/IP Printer Port Wizard