Reference Manual for the ProSafe Wireless 802.11g Firewall/Print Server Model FWG114P v2

4.Set up the FWG114P v2 VPN -Auto Policy illustrated below.

a.From the main menu VPN section, click on the VPN Policies link, and then click on the Add Auto Policy button.

WAN IP

address

LAN IP addresses

Figure 8-15: Scenario 1 VPN - Auto Policy

b.Configure the IKE Policy according to the settings in the illustration above and click Apply to save your settings. For more information on IKE Policy topics, please see “IKE Policies’ Automatic Key and Authentication Management” on page 8-3.

Note: Selecting ANY for the Traffic Selectors means all traffic goes through the IPSec tunnel and prevents access to the Internet.

5.After applying these changes, all traffic from the range of LAN IP addresses specified on FWG114P v2 A and FWG114P v2 B will flow over a secure VPN tunnel.

Virtual Private Networking

8-23

201-10301-02, May 2005

Page 135
Image 135
NETGEAR manual Set up the FWG114P v2 VPN -Auto Policy illustrated below, Address