NETGEAR FWG114P v2 manual Wizard-Detected Login Account Setup

Reference Manual for the ProSafe Wireless 802.11g Firewall/Print Server Model FWG114P v2

•Fixed IP address assignment

Next, the Setup Wizard will report which connection type it has discovered, and then display the appropriate configuration menu. If the Setup Wizard finds no connection, you will be prompted to check the physical connection between your firewall and the cable or DSL modem. When the connection is properly made, the firewall’s Internet LED should be on.

The procedures for filling in the configuration menu for each type of connection follow below.

Wizard-Detected Login Account Setup

If the Setup Wizard determines that your Internet service account uses a login protocol, such as PPP over Ethernet (PPPoE), you will be directed to a menu like the PPPoE menu in Figure 3-9:

Figure 3-9: Setup Wizard menu for PPPoE login accounts

1.Enter your Account Name (may also be called Host Name) and Domain Name. These parameters may be necessary to access your ISP’s services, such as mail or news servers. If you leave the Domain Name field blank, the firewall will attempt to learn the domain automatically from the ISP. If this is not successful, you may need to enter it manually.

2.Enter the PPPoE login user name and password provided by your ISP. These fields are case sensitive. If you wish to change the idle timeout, enter a new value in minutes.

Connecting the FWG114P v2 to the Internet 3-11

201-10301-02, May 2005