Chapter 2

Introduction

This chapter describes the features of the NETGEAR ProSafe Wireless 802.11g Firewall/Print Server Model FWG114P v2.

Key Features of the FWG114P v2

The ProSafe Wireless 802.11g Firewall/Print Server Model FWG114P v2, with a 4-port switch, connects your LAN to the Internet through a broadband modem. With auto fail-over connectivity through the serial port, the FWG114P v2 provides highly reliable Internet access.

The FWG114P v2 is a complete security solution that protects your network from attacks and intrusions and enables secure communications using Virtual Private Networks (VPNs). Unlike simple Internet sharing routers that rely on Network Address Translation (NAT) for security, the FWG114P v2 uses Stateful Packet Inspection for Denial of Service attack (DoS) attack protection and intrusion detection. The FWG114P v2 allows Internet access for up to 253 users. It provides multiple Web content filtering options, plus browsing activity reporting and instant alerts via e-mail. Parents or network administrators can establish restricted access policies based on time-of-day, Web site addresses and address keywords, and share high-speed cable/DSL Internet access for up to 253 personal computers.

With minimum setup, you can install and use the router within minutes. The FWG114P v2 Wireless Firewall/Print Server provides the following features:

802.11g and 802.11b standards-based wireless networking.

Easy, Web-based setup for installation and management.

Supports two VPN tunnels, Content Filtering, and Site Blocking Security.

Wireless Multimedia (WMM) support.

Built-in 4-port 10/100 Mbps Switch and USB 2.0 Printer Port.

Ethernet and Serial ports for connection to a WAN device, such as a broadband modem.

Extensive Protocol Support.

Login capability.

Front panel LEDs for easy monitoring of status and activity.

Introduction

2-1

201-10301-02, May 2005

Page 19
Image 19
NETGEAR FWG114P v2 manual Chapter Introduction, Key Features of the FWG114P