NETGEAR FWG114P v2 manual Configuring Static Routes

Reference Manual for the ProSafe Wireless 802.11g Firewall/Print Server Model FWG114P v2

3.Type the MAC Address of the computer or server.

(Tip: If the computer is already present on your network, you can copy its MAC address from the Attached Devices menu and paste it here.)

4.Click Apply to enter the reserved address into the table.

Note: The reserved address will not be assigned until the next time the computer contacts the router's DHCP server. Reboot the computer or access its IP configuration and force a DHCP release and renew.

To edit or delete a reserved address entry:

1.Click the button next to the reserved address you want to edit or delete.

2.Click Edit or Delete.

Configuring Static Routes

Static Routes provide additional routing information to your router. Under normal circumstances, the router has adequate routing information after it has been configured for Internet access, and you do not need to configure additional static routes. You must configure static routes only for unusual cases, such as multiple routers or multiple IP subnets located on your network.

From the Main Menu of the browser interface, under Advanced, click on Static Routes to view the Static Route menu.

To add or edit a Static Route:

1.Click the Add button to open the Static Routes menu.

10-8 Advanced Configuration

201-10301-02, May 2005