Reference Manual for the ProSafe Wireless 802.11g Firewall/Print Server Model FWG114P v2

To restrict access based on MAC addresses, click the Set up Access List button and update the MAC access control list.

Security Options

Disable: No data encryption is used.

WEP (Wired Equivalent Privacy): Use WEP 64 or 128 bit data encryption.

WPA with Radius: This version of WPA requires the use of a Radius server for authentication. Each user (Wireless Client) must have a "user" login on the Radius Server - normally done via a digital certificate. Also, this device must have a "client" login on the Radius server. Data transmissions are encrypted using a key which is automatically generated.

WPA2 with Radius: WPA2 is a later version of WPA. Only select this if all clients support WPA2. If selected, you must use AES encryption, and configure the Radius Server Settings. Each user (Wireless Client) must have a "user" login on the Radius Server - normally done via a digital certificate. Also, this device must have a "client" login on the Radius server. Data transmissions are encrypted using a key which is automatically generated.

WPA and WPA2 with Radius: This selection allows clients to use either WPA (with AES encryption) or WPA2 (with TKIP encryption). If selected, encryption must be TKIP + AES. If selected, you must configure the Radius Server Settings.

WPA-PSK (Wi-Fi Protected Access Pre-Shared Key): Use WPA-PSK standard encryption

WPA2-PSK: WPA2 is a later version of WPA. Only select this if all clients support WPA2. If selected, you must use AES encryption, and enter the WPA passphrase (Network key).

WPA-PSK and WPA2-PSK: This selection allows clients to use either WPA (with AES encryption) or WPA2 (with TKIP encryption). If selected, encryption must be TKIP + AES.

Wireless Configuration

4-5

201-10301-02, May 2005

Page 53
Image 53
NETGEAR FWG114P v2 manual Security Options