Reference Manual for the ProSafe Wireless 802.11g Firewall/Print Server Model FWG114P v2

Before You Change the SSID and WEP Settings

Take the following steps:

For a new wireless network, print or copy this form and fill in the configuration parameters. For an existing wireless network, the person who set up or is responsible for the network will be able to provide this information. Be sure to set the Regulatory Domain correctly as the first step.

SSID: The Service Set Identification (SSID) identifies the wireless local area network. Wireless is the default FWG114P v2 SSID. However, you may customize it by using up to 32 alphanumeric characters. Write your customized SSID on the line below.

Note: The SSID in the wireless firewall/print server is the SSID you configure in the wireless adapter card. All wireless nodes in the same network must be configured with the same SSID:

Authentication

Circle one: Open System or Shared Key. Choose “Shared Key” for more security.

Note: If you select shared key, the other devices in the network will not connect unless they are set to Shared Key as well and have the same keys in the same positions as those in the FWG114P v2.

WEP Encryption Keys

For all four 802.11b keys, choose the Key Size. Circle one: 64 or 128 bits

Key 1: ___________________________________

Key 2: ___________________________________

Key 3: ___________________________________

Key 4: ___________________________________

WPA-PSK or WPA2-PSK(Pre-Shared Key) Record the WPA-PSK or WPA2-PSK key:

Key: ___________________________________

WPA or WPA2 RADIUS Settings

For WPA or WPA2, record the following RADIUS settings:

Server Name/IP Address: Primary _________________ Secondary __________________

Port: ___________________________________

Shared Key: ___________________________________

Use the procedures described in the following sections to configure the FWG114P v2. Store this information in a safe place.

Wireless Configuration

4-7

201-10301-02, May 2005

Page 55
Image 55
NETGEAR FWG114P v2 manual Before You Change the Ssid and WEP Settings, Authentication, WEP Encryption Keys