Reference Manual for the ProSafe Wireless 802.11g Firewall/Print Server Model FWG114P v2

Configuring LAN-to-LAN Settings

LAN-to-LAN enables direct communications between two FWG114P v2 wireless firewall/print servers.

)LUHZDOO$

Á?aM?™a +Á.?wjËoåÔ±¤¤~Ë8‰ÁjjÄÄˉÁjÝ?Ê+Á‰™ÍË.jÁÜjÁ

8¤¤+



6HULDO&RQQHFWLRQ

)LUHZDOO%

Á?aM?™a +Á.?wjËoåÔ±¤¤~Ë8‰ÁjjÄÄˉÁjÝ?Ê+Á‰™ÍË.jÁÜjÁ

8¤¤+



Figure 5-4: LAN-to-LAN network configuration

Basic Requirements for LAN-to-LAN Connections

Serial port LAN-to-LAN configurations require these elements:

1.An ISDN or analog phone line with an active ISDN or dial-up ISP account.

2.A serial modem properly configured and attached to the DB9 connector on the serial port.

3.A broadband connection to one FWG114P v2 for LAN-to-LAN auto-rollover Internet access.

4.The LAN-to-LAN settings configured and applied to the two FWG114P v2 wireless firewall/ print servers.

How to Configure LAN-to-LAN Connections

Follow these steps to configure a serial port LAN-to-LAN connection.

1.Configure a serial port modem.

2.From the main menu, click LAN-to-LANin the Serial Port section.

5-6

Serial Port Configuration

201-10301-02, May 2005M-10207-01, Reference Manual v2

Page 76
Image 76
NETGEAR FWG114P v2 manual Configuring LAN-to-LAN Settings, Basic Requirements for LAN-to-LAN Connections