NETGEAR FWG114P v2 manual E-mail menu

Reference Manual for the ProSafe Wireless 802.11g Firewall/Print Server Model FWG114P v2

Figure 6-9: E-mail menu

•Turn e-mail notification on. Select this check box if you want to receive e-mail logs and alerts from the router.

•Send alerts and logs by e-mail.If you enable e-mail notification, these boxes cannot be blank. Enter the name or IP address of your ISP’s outgoing (SMTP) mail server (such as mail.myISP.com). You may be able to find this information in the configuration menu of your e-mail program. Enter the e-mail address to which logs and alerts will be sent. This e-mail address will also be used as the From address. If you leave this box blank, log and alert messages will not be sent via e-mail. Check “My Mail Server requires authentication” if you need to log in to your SMTP server in order to send e-mail. If this is checked, you must enter the login name and password for your mail server.

Tip: You used this information when you set up your e-mail program. If you cannot remember it, check the settings in your e-mail program.

•Send E-mail alerts immediately. You can specify that logs are immediately sent to the specified e-mail address when any of the following events occur:

6-14 Firewall Protection and Content Filtering

201-10301-02, May 2005