NETGEAR manual Connecting the FWG114P v2 Wireless Firewall/Print Server

Reference Manual for the ProSafe Wireless 802.11g Firewall/Print Server Model FWG114P v2

Connecting the FWG114P v2 Wireless Firewall/Print Server

This section provides instructions for connecting the FWG114P v2 Wireless Firewall/Print Server. Also, the Resource CD for the ProSafe Wireless 802.11g Firewall/Print Server Model FWG114P (SW-10023-03), included with your router, contains an animated Installation Assistant to help you through this procedure.

Verify That Basic Requirements Are Met

Assure that the following requirements are met:

•You have your broadband Internet service settings handy.

•The computer is configured to obtain an IP address automatically via DHCP. For instructions on how to do this, please see the Reference Manual on the Resource CD for the ProSafe Wireless 802.11g Firewall/Print Server Model FWG114P (SW-10023-03).

1.CONNECT THE WIRELESS FIREWALL/PRINT SERVER

a.Turn off your computer and cable or DSL modem.

b.Disconnect the Ethernet cable (A) from your computer which connects to the broadband modem.

Disconnect computerfrom A

&DEOHRU'6/PRGHP

Figure 3-1: Disconnect the broadband modem

3-4 Connecting the FWG114P v2 to the Internet

201-10301-02, May 2005