Reference Manual for the ProSafe Wireless 802.11g Firewall/Print Server Model FWG114P v2

The VPN Manual Policy fields are defined in the following table.

Table 8-1.

VPN Manual Policy Configuration Fields

 

 

 

 

Field

 

Description

 

 

 

 

 

General

 

These settings identify this policy and determine its major characteristics.

 

Policy Name

 

The name of the VPN policy. Each policy should have a unique policy

 

 

 

name. This name is not supplied to the remote VPN Endpoint. It is used to

 

 

 

help you identify VPN policies.

 

Remote VPN Endpoint

The WAN Internet IP address of the remote VPN firewall or client to which

 

 

 

you wish to connect. The remote VPN endpoint must have this FWG114P

 

 

 

v2’s WAN Internet IP address entered as its “Remote VPN Endpoint.”

 

 

 

 

 

Traffic Selector

 

These settings determine if and when a VPN tunnel will be established. If

 

 

 

network traffic meets all criteria, then a VPN tunnel will be created.

 

Local IP

 

The drop down menu allows you to configure the source IP address of the

 

 

 

outbound network traffic for which this VPN policy will provide security.

 

 

 

Usually, this address will be from your network address space. The

 

 

 

choices are:

 

 

 

• ANY for all valid IP addresses in the Internet address space

 

 

 

Note: Selecting ANY means all traffic goes through the IPSec tunnel

 

 

 

and prevents access to the Internet.

 

 

 

• Single IP Address

 

 

 

• Range of IP Addresses

 

 

 

• Subnet Address

 

Remote IP

 

The drop down menu allows you to configure the destination IP address of

 

 

 

the outbound network traffic for which this VPN policy will provide security.

 

 

 

Usually, this address will be from the remote site's corporate network

 

 

 

address space. The choices are:

 

 

 

• ANY for all valid IP addresses in the Internet address space

 

 

 

Note: Selecting ANY means all traffic goes through the IPSec tunnel

 

 

 

and prevents access to the Internet.

 

 

 

• Single IP Address

 

 

 

• Range of IP Addresses

 

 

 

• Subnet Address

 

 

 

 

Authenticating Header (AH)

AH specifies the authentication protocol for the VPN header. These

 

Configuration

 

settings must match the remote VPN endpoint.

 

 

 

Note: The "Incoming" settings here must match the "Outgoing" settings on

 

 

 

the remote VPN endpoint, and the "Outgoing" settings here must match

 

 

 

the "Incoming" settings on the remote VPN endpoint.

 

 

 

 

 

 

 

 

Virtual Private Networking

8-11

201-10301-02, May 2005

Page 123
Image 123
NETGEAR FWG114P v2 VPN Manual Policy fields are defined in the following table, VPN Manual Policy Configuration Fields