Reference Manual for the ProSafe Wireless 802.11g Firewall/Print Server Model FWG114P v2

Netgear VPN Client to FWG114P v2

Follow these procedures to configure a VPN tunnel from a NETGEAR ProSafe VPN Client to an FWG114P v2. This case study follows the Virtual Private Network Consortium (VPNC) interoperability profile guidelines. The menu options for the FVS328, FVL328, FWAG114, and FWG114P v2 are the same.

Configuration Profile

The configuration in this document follows the addressing and configuration mechanics defined by the VPN Consortium. Gather all the necessary information before you begin the configuration process. Verify whether the firmware is up to date, all of the addresses that will be necessary, and all of the parameters that need to be set on both sides. Check that there are no firewall restrictions.

Table 8-1.

Summary

 

 

 

 

VPN Consortium Scenario:

Scenario 1

Type of VPN

 

PC/Client-to-Gateway

Security Scheme:

IKE with Preshared Secret/Key (not Certificate-based)

Date Tested:

 

December 2003

Model/Firmware Tested:

 

 

 

 

 

 

Gateway

 

FWG114P firmware v 2.2

 

 

 

 

 

Client

 

NETGEAR ProSafe VPN Client v10.1

 

 

 

 

IP Addressing:

 

 

 

 

 

 

 

Gateway

 

Static IP address

 

 

 

 

 

Client

 

Dynamic

 

 

 

 

8-32

Virtual Private Networking

201-10301-02, May 2005

Page 144
Image 144
NETGEAR FWG114P v2 manual Netgear VPN Client to FWG114P, Configuration Profile, Summary