Panasonic MN1030 Too many arguments, Can’t find Funcinfo directive, No optimizing information

Chapter 13 Error Messages

2328	Too many arguments.
	A macro invocation has too many arguments.
	Check the macro definition.
2329	Can’t find FUNCINFO directive.
	There is a ret or retf machine instruction before the corresponding funcinfo directive.
	Declare funcinfo directive before the ret or retf machine instruction.
2330	Line too long.
	A source statement exceeds the length limit.
	Edit the source statement so that its length is within the limit.
2331	No optimizing information.
	The map file does not contain optimization information.
	Check the map file.
2332	Error in configure file.
	There is an error in the start-up file.
	Correct the start-up file.
2333	Illegal map file value.
	The map file and the assembly result disagree.
	Check the value in the map file.

256 Assembler Errors