Panasonic MN1030 user manual Illegal section name, Illegal operand expression, Too many operands

Chapter 13 Error Messages

2314	Illegal section name.
	There is an error in a section name.
	Check the spelling of the section name.
2315	Operand error.
	An operand of the wrong type is used.
	Check the number and types of operands.
2316	Illegal operand expression.
	An operand expression does not evaluate to a value within the specified range.
	Check the operand expression.
2317	Too many operands.
	An operand of the wrong type is used.
	Check the number and types of operands,
2318	Illegal operand value.
	An operand has a value that is not within the specified range.
	Check the operand value to place it within the specified range.
2319	Operand type should be absolute.
	An operand does not have an absolute value.
	Specify an absolute value for the operand.
2320	Debug operand error.
	The assembler and the C compiler have different version numbers.
	Check that the assembler and C compiler are the most recent versions.
2321	Illegal location counter.
	The location counter value for an org direction has an illegal value.
	Change the location counter value for the org directive.
2322	Operand not need.
	There is a superfluous operand.
	Eliminate the superfluous operand.
2323	Include file cannot read.
	There is a mistake in the file name specification.
	Check the file name specification.
2324	Too many “#else”.
	There are too many #else.
	Check the #else specification.
2325	Too many “#if” or “#endif”.
	The #if and #endif are not balanced.
	Check the #if and #endif.
2326	Missing endm.
	A macro statement is missing its closing endm.
	Check all macro and endm statements.
2327	Macro symbol is used recursively.
	A macro is defined recursively.
	Check the macro definitions.

Assembler Errors 255