Datalogic Scanning 3200VSI manual Default Setting for this Feature mP 6D500000 hex

Label ID

Label ID — cont.

For the 2D symbologies on this page, the Label ID is 4 bytes. The first 3 bytes are characters for the label ID. A 00 (hex) value in the first 3 bytes indicates the end of the label ID characters. The 4th byte is a control byte.

NOTE

The use of the control byte is as follows:

bit 0-if set to 1, the AIM ID is appended for that label type

START / END

PROGRAMMING bar codes

Set Micro PDF 417 Label ID Character(s)

DEFAULT SETTING FOR THIS FEATURE: mP (6D500000 hex)

Set QR Code Label ID Character(s)

DEFAULT SETTING FOR THIS FEATURE: QR (51520000 hex)

Set Maxicode Label ID Character(s)

DEFAULT SETTING FOR THIS FEATURE: MC (4D430000 hex)

Set Aztec Label ID Character(s)

DEFAULT SETTING FOR THIS FEATURE: Az (417A0000 hex)

Set GS1 DataBar Omnidirectional 2D Composite

Label ID Character(s)

DEFAULT SETTING FOR THIS FEATURE: R4 (52340000 hex)

Set GS1 DataBar Limited 2D Composite

Label ID Character(s)

DEFAULT SETTING FOR THIS FEATURE: RL (524C0000 hex)

Set GS1 DataBar Expanded 2D Composite

Label ID Character(s)

DEFAULT SETTING FOR THIS FEATURE: RX (52340000 hex)

Product Reference Guide 83