Datalogic Scanning 3200VSI manual Image Compression, Image Format

Image Compression

Image Compression

Specifies the starting image compression factor for JPEG images. A higher number specifies a higher quality image with less compression than a relative lower number for the same image.

A value of 100 means minimal compression. A value of 1 means maximum compression at a loss of quality. Follow these steps to program this feature:

1.Scan the START bar code.

2.Scan the Set Image Compression bar code.

3.Turn to Alpha-Numeric Pad and scan the two digits (zero-padded) representing the desired compression. The configurable range is 01-0x64 by increments of 01.

4.Scan the END bar code.

START / END

PROGRAMMING bar codes

Set Image Compression

DEFAULT SETTING IS

100 (minimal compression — higher quality)

Image Format

Specifies the format of the captured image

START / END

PROGRAMMING bar codes

Image Format = JPG

DEFAULT

Image Format = BMP

Product Reference Guide 33