Datalogic Scanning 3200VSI Scanning Features

Scanning Features

Product Reference Guide

Scanning Features

Wake Up Intensity

This feature indicates the percentage of ambient light change which will trigger the scanner to

wake up from Sleep Mode. Lower settings provide greater sensitivity. The selectable range for

this setting is 5% to 15%.

START / END

PROGRAMMING bar codes

10%

DEFAULT

11%

12%

Contents

Main Page Product Reference Guide i Table of Contents ii 3200VSi Product Reference Guide iii Page Product Reference Guide v Page Chapter 1 Getting Started About This Manual Manual Conventions Connecting the Scanner a b c Error Codes Page Wall Mount ab Countertop Mount LED and Beeper Indicators Page Programming Using the Programming Bar Codes Resetting the Standard Product Defaults Bar Code Mask Page Chapter 2 General Features Double Read Timeout for Linear Labels Double Read Timeout for Linear Labels cont. Double Read Timeout for 2D Labels General Features 14 3200VSi Scanner Button Options Scanner Button Options = All functions Scanner Button Options = Enable only volume, tone, and reset Scanner Button Options = Enable reset only Scanner Button Options = Disable all button functions Camera Button Mode Product Reference Guide Camera Button Mode Camera Button Mode = Normal Take Picture operation General Features 16 3200VSi Auto Cell Phone Mode Auto Cell Phone Mode Enable Enables/disables Auto Cell Phone Mode. Auto Cell Phone Mode = Disable Auto Cell Phone Mode = Enable Normal Auto Cell Phone Mode = Enable Sensitive LED Level This feature defines the LED intensity level by pulse width. Auxiliary Port Mode Auxiliary Port Baud Rate Specifies baud rate of auxillary port when operating in PIR/CT mode. Productivity Index Reporting (PIR) Sleep Mode Sleep Mode cont. LED and Beeper Indicators Power On Alert External Read Indicator (ERI) Active State High ERI Timeout Good Read: When to Indicate Good Read Beep Control This feature enables/disables the scanners ability to beep upon a successful decode of a bar code. Good Read Beep Frequency Good Read Beep Length Specifies the duration of a good read beep. Good Read Beep Volume Scanning Features Wake Up Intensity Wake Up Intensity cont. Chapter 3 Image Capture Image Capture How to Capture an Image Image Capture to a microSD Card by Scanning a Special Label Image Capture to the Host by Host Command Image Compression Image Format Image Capture 34 3200VSi Image Size Specifies the size of the image capture. Choices are: VGA WVGA SXGA, Full Size CIF Image Size = VGA Image Size = WVGA Image Size = SXGA, Full Size Image Size = CIF Image Brightness Image Brightness Image Contrast Set Image Brightness DEFAULT SETTING FOR THIS FEATURE: 09 Set Image Contrast DEFAULT SETTING FOR THIS FEATURE: 09 Page Chapter 4 Interface Related Features Page Interface Selection Interface Selection cont. Interface Features Obey/Ignore Host Commands Interface Features cont. Host Transmission Buffers RS-232 Interface Features Page Hardware Flow Control Intercharacter Delay Intercharacter Delay cont. Software Flow Control Disables/Enables software control using XON/XOFF characters. Host Echo Host Echo Quiet Interval Host Echo Quiet Interval cont. Signal Voltage: Normal/TTL Specifies whether the RS-232 interface provides TTL levels on the output pins TxD and RTS. RS-232 Invert Beep on ASCII BEL Beep on Not on File ACK NAK Options ACK Character NAK Character Retry on ACK NAK Timeout ACK NAK Timeout Value ACK NAK Retry Count ACK NAK Error Handling Transmission Failure Indication Single Cable RS-232 Single Cable RS-232 Options Single Cable RS-232 RTS CTS Selection Single Cable RS-232 Use BCC Enables/disables the ability of the scanner to use BCC. Enables/disables the ability of the scanner to use ACK/NAK. Single Cable RS-232 Use ACK/NAK Single Cable RS-232 Use STX Set Single Cable RS-232 STX Character Single Cable RS-232 Use ETX Set Single Cable RS-232 ETX Character Single Cable Pacesetter Plus Enables/disables sending Pacesetter Plus information as trailers to UPC/EAN labels. Enables Datalogic Scanning, Inc. extensions to the Single Cable RS-232 interface. Single Cable Datalogic Extensions USB-OEM Interface Features USB-OEM Device usage IBM IBM Transmit Labels in Code 39 Format Keyboard Wedge USB Keyboard Page Caps Lock State Specifies the format in which the scanner sends character data. Page Page Page USB COM Interface Set-up Page Chapter 5 Data Editing OR... Data Editing Overview Please Keep In Mind... Global Prefix/Suffix OR... Global Prefix/Suffix cont. AIM ID Label ID OR Page Page Page Page Page Page Case Conversion Character Conversion Page Chapter 6 Symbologies UPC-A Disable/Enable UPC-A UPC-A continued Enable this option to transmit the check digit along with UPC-A bar code data. This feature enables/disables transmission of UPC-A System Number. Number System Transmission UPC-A continued Expand UPC-A to EAN-13 UPC-E The following options apply to the UPC-E symbology. Enable this option to transmit the check digit along with UPC-E bar code data. Disable/Enable UPC-E When disabled, the scanner will not read UPC-E bar codes. UPC-E continued Number System Digit Expand to UPC-E to UPC-A UPC-E continued Expand UPC-E to EAN13 Page EAN-13 The following options apply to the EAN-13 symbology. Enable this option to transmit the check digit along with EAN-13 bar code data. Disable/Enable EAN-13 When disabled, the scanner will not read EAN-13 bar codes. EAN-13 continued EAN-13 Flag 1 Character ISBN EAN-8 The following options apply to the EAN-8 symbology. Enable this option to transmit the check Digit along with EAN-8 bar code data. Disable/Enable EAN-8 When disabled, the scanner will not read EAN-8 bar codes. EAN-8 continued EAN Two-Label Enables/disables the ability of the scanner to decode EAN two-label pairs. Enables/disables the transmitting of an EAN two label pair as one label. EAN Two-Label Combined Transmission Price Weight Check Digit Add-ons Contact Customer Support for advanced programming of optional and conditional add-ons. Add-ons continued GS1 DataBar Omnidirectional / Stacked Omnidirectional Disable/Enable GS1 DataBar Omnidirectional UCC/EAN 128 Emulation GS1 DataBar Expanded / Expanded Stacked Disable/Enable GS1 DataBar Expanded GS1-128 Emulation Page GS1 DataBar Expanded Length 1, Length 2 Programming Instructions Coupon Read Control This feature controls coupon reading. GS1 DataBar Limited The following options apply to the GS1 DataBar Limited symbology. Disable/Enable GS1 DataBar Limited When this feature is disabled, the scanner will not read GS1 DataBar Limited bar codes. GS1-128 Emulation Code 39 Disable/Enable Code 39 Check Character Calculation Start/Stop Characters Enables/disables transmission of Code39 start and stop characters. Code 39 Full ASCII Enables/disables the translation of Code 39 characters to Code 39 full-ASCII characters. Code 39 continued Code 39 Length 1, Length 2 Programming Instructions Code 32 Italian Pharmacode The following options apply to the Code 32 Italian Pharmacode symbology. Enables or disables transmission of Code 32 Italian Pharmacode start/stop characters. Disable/Enable Code 32 Italian Pharmacode When this feature is disabled, the scanner will not read Code 32 Italian Pharmacode bar codes. Code 32 Italian Pharmacode continued Code 128 Disable/Enable Code 128 Disable/Enable EAN 128 Transmit Function Characters Page Code 128 Length 1, Length 2 Programming Instructions Code 128 Conversion to Code 39 Interleaved 2 of 5 Disable/Enable Interleaved 2 of 5 Check Digit Calculation Check Digit Transmit Enable this option to transmit the check digit with scanned bar code data. Page Interleaved 2 of 5 Length 1, Length 2 Programming Instructions Codabar Disable/Enable Codabar Check Character Verification Page Page Codabar Length 1, Length 2 Programming Instructions Start/Stop Character Type Codabar has four pairs of Start/Stop patterns. Select one pair to match your application. The transmission of start and end characters of Codabar is selected below. Start/Stop Character Transmission Start/Stop Character Match This feature enables/disables the requirement that start and stop characters match. Code 93 Disable/Enable Code 93 Page Code 93 continued Code 93 Length 1, Length 2 Programming Instructions Page 2D Symbologies 2D Symbologies PDF 417 Disable/Enable PDF 417 When disabled, the scanner will not read PDF 417 bar codes. Page PDF 417 continued PDF 417 Length 1, Length 2 Programming Instructions Micro PDF 417 Disable/Enable Micro PDF 417 When disabled, the scanner will not read Micro PDF 417 bar codes. Page Micro PDF 417 continued Micro PDF 417 Length 1, Length 2 Programming Instructions Datamatrix Disable/Enable Datamatrix When disabled, the scanner will not read Datamatrix bar codes. Page Datamatrix continued Datamatrix Length 1, Length 2 Programming Instructions QR Code Disable/Enable QR Code When disabled, the scanner will not read QR Code labels. Page QR Code continued QR Code Length 1, Length 2 Programming Instructions Maxicode Disable/Enable Maxicode When disabled, the scanner will not read Maxicode labels. Page Maxicode continued Maxicode Length 1, Length 2 Programming Instructions Aztec Disable/Enable Aztec When disabled, the scanner will not read Aztec labels. Page Aztec continued Aztec Length 1, Length 2 Programming Instructions Composite Labels Disable/Enable GS1 DataBar Omnidirectional 2D Component Disable/Enable GS1 DataBar Expanded 2D Component Disable/Enable GS1 DataBar Limited 2D Component Page Advanced Decoding Features Inverse Label Reading This controls the method of reading inverse labels (white label on black background). Page Appendix A Product Specifications Optical and Read Performance Parameters Scanner Dimensions Physical Properties Electrical Parameters Environmental Parameters Other Parameters Page Page Appendix B Cable Pinouts Standard Cable Pinouts (Primary Interface Cables) Cable Pinouts (Handheld Scanner Attached via the Aux Port) Page Page Alpha-Numeric Pad Appendix D Factory Default Settings Factory Defaults by Interface The following is a partial list of key settings for each interface type. Page Page Page Page Page Appendix E Keyboard Function Key Mappings Keyboard Model Cross Reference Page Page Page Page Page Page Page Appendix F Host Commands Accepting RS-232 Commands The scanner responds to the following RS-232 commands: Page Appendix G Sample Symbols 1D Symbol Samples 1D Symbol Samples continued (01)16543210987654 2D Sample Symbols Product Reference Guide 183 2D Sample Symbols 111TUVCCIUL7-1 1314H17LL A12B3C BV17453 Page Appendix H microSD Card microSDHC Compatibility microSD Card Insertion/Removal Indication Autorun File Processing microSD Function Summary The following table summarizes various functions of micro SD card. microSD Function Details From Scanner to microSD Card Capture and save an image to a micro SD card by scanning a label. Export a Configuration file from the Scanner to the micro SD card Export Scanner Status to microSD card From microSD Card to Scanner Application code load to scanner CPLD code load to the scanner Configuration load to scanner Page ASCII Chart