Appendix H

microSD Card

microSDHC Compatibility

At the time of this writing, the micro SD card interface for this product supports SD-Memory Card Specifications/ Part 1. Physical Layer Specification; Version 1.01, but the processor MCI can communicate with SDHC Cards. For example, the scanner can perform the functions specified in this appendix for the SDA 2.0 specification.

microSD Card Insertion/Removal Indication

The scanner will audibly indicate insertion and removal of a micro SD card if the test port is not active or host commands are not in progress.

Autorun File Processing

After insertion of the card, the scanner will mount the micro SD card and search for the file “autorun.dls”. Embed- ded in that file is a validation pattern of the ASCII strings “$START$” and “$END$” located at the respective starting and ending of the file.

If the validation pattern is found, the file may contain any of the following commands. The scanner will parse the file taking action according to these commands. Filenames in italics specify a user-defined name.

Example autorun.dls file:

$START$ (required)

CARDINFO

CONFIG, filename.tex

DUMPSTATS, filename.txt

DUMPCFG, filename.tex

LOADSW, filename.bin

LOADHW, filename.vme

$END$ (required)

Product Reference Guide

185

Page 193
Image 193
Datalogic Scanning 3200VSI MicroSDHC Compatibility, MicroSD Card Insertion/Removal Indication, Autorun File Processing