Physical Properties, Other Parameters | Datalogic Scanning 3200VSI

Physical Properties

Parameter	Specification


Dimensions (Scanner only):	6” x 5.6” x 3.3” (WxHxD)

Weight (Scanner)	1 lb 4.6 oz (0.584kg)

Electrical Parameters

Parameter	Specification


Operating Voltage	Input voltage 7 to 14 VDC

Input Current @ 12 VDC
Operating (idle)	<190mA
Operating (label read)	<410 mA

Environmental Parameters

Parameter	Specification


Contaminants
Water and Dust	IP5x

Temperature Ranges:
Operating	32° F to +104° F (0° C to +40° C)
Storage	-40°F to +158° F (-40°C to +70° C)

Ambient Light Indoor	0 - 6,000 lux

Ambient Light Outdoor	0 - 86,100 lux

Humidity	5% to 95% non-condensing

Beeper/Speaker	70-90dBA at a distance of 3’-3” (1 meter)

Vibration	Retail/Office

Other Parameters

Parameter	Specification


EAS Support	YES (Checkpoint)

158	MagellanTM 3200VSi

Image 166

Datalogic Scanning 3200VSI Physical Properties, Electrical Parameters, Environmental Parameters, Other Parameters, 158

Contents

MagellanTM 3200VSi Datalogic Scanning, Inc Table of Contents MagellanTM 3200VSi Iii 161 185 MagellanTM 3200VSi About This Manual Manual Conventions Connecting the Scanner Connecting the Scanner Error Codes Error Mount Installation Bracket Mount Wall Mount Countertop Mount LED and Beeper Indicators Green LED Indications Beeper Functions Using the Programming Bar Codes Resetting the Standard Product DefaultsProgramming Bar Code Mask Going Green General Features Double Read Timeout for Linear Labels Double Read Timeout for Linear Labels Double Read Timeout for 2D Labels Scanner Button Options Camera Button Mode Auto Cell Phone Mode Enable Auto Cell Phone ModeEnables/disables Auto Cell Phone Mode This feature defines the LED intensity level by pulse width LED Level Auxiliary Port Mode Auxiliary Port Baud Rate Productivity Index Reporting PIR Sleep Mode Sleep Mode Power On Alert External Read Indicator ERI Active State High ERI Timeout Good Read When to Indicate Good Read Beep Control Good Read Beep Frequency Good Read Beep Length Specifies the duration of a good read beep Good Read Beep Volume Scanning Features Wake Up Intensity Wake Up Intensity Image Capture How to Capture an ImageImage Capture to a microSD Card by Scanning a Special Label Image Capture to the Host by Host Command Host command format is as follows PcntpSBC Image Format Image CompressionSpecifies the format of the captured image Specifies the size of the image capture. Choices are Image SizeSXGA, Full Size Image Brightness Image Contrast Image Capture Interface Related Features Interfaces Supported Keyboard Wedge Interface Reference PCs Supported Interface Selection Interface Selection Interface Features Obey/Ignore Host Commands Interface Features Host Transmission Buffers RS-232 Interface Features RS-232 Interface Features Hardware Flow Control Intercharacter Delay Disables/Enables software control using XON/XOFF characters Software Flow Control Host Echo Host Echo Quiet Interval Signal Voltage Normal/TTL Host Echo Quiet Interval RS-232 Invert Enables/disables inversion of RS-232 TXD and RXD signalsBeep on Ascii BEL Beep on Not on File ACK NAK Options ACK Character NAK Character Retry on ACK NAK Timeout ACK NAK Timeout Value ACK NAK Retry Count ACK NAK Error Handling Single Cable RS-232 Options Single Cable RS-232Transmission Failure Indication Single Cable RS-232 RTS CTS Selection Single Cable RS-232 Use BCC Enables/disables the ability of the scanner to use BCCEnables/disables the ability of the scanner to use ACK/NAK Single Cable RS-232 Use ACK/NAK Single Cable RS-232 Use STX Enables/disables the ability of the scanner to use STXSet Single Cable RS-232 STX Character Single Cable RS-232 Use ETX Enables/disables the ability of the scanner to use ETXSet Single Cable RS-232 ETX Character Single Cable Pacesetter Plus Single Cable Datalogic Extensions USB-OEM Device usage USB-OEM Interface FeaturesIBM Transmit Labels in Code 39 Format Keyboard Wedge USB Keyboard Keyboard Wedge Caps Lock State Disable Power-on Simulation Vided for each available scancode set. Reference pings 010 100 msec Intercharacter Delay USB COM Interface Set-up Interface Related Features Data Editing Overview Please Keep In Mind Global Prefix/Suffix Prefix and Suffix Positions Global Prefix/Suffix AIM ID Label ID Label ID Position Options Label ID Default Setting for this Feature FF 4646 hex Default Setting for this Feature F 46 hex Default Setting for this Feature G8 4738 hex Default Setting for this Feature % 25 hex Default Setting for this Feature mP 6D500000 hex Case Conversion Character Conversion 41423132FFFFFFFF Data Editing Disable/Enable UPC-A When disabled, the scanner will not read UPC-A bar codes Check Digit Transmission UPC-ANumber System Transmission Expand UPC-A to EAN-13 Following options apply to the UPC-E symbology Disable/Enable UPC-EWhen disabled, the scanner will not read UPC-E bar codes Number System Digit UPC-EExpand to UPC-E to UPC-A Expand UPC-E to EAN13 Expand UPC/EAN to Gtin Following options apply to the Gtin label data format When disabled, the scanner will not read EAN-13 bar codes Disable/Enable EAN-13Following options apply to the EAN-13 symbology EAN-13 EAN-13 Flag 1 Character Bar Code data 9789572222720 Output9572222724 Following options apply to the EAN-8 symbology Disable/Enable EAN-8When disabled, the scanner will not read EAN-8 bar codes EAN-8 EAN Two-Label EAN Two-Label Combined Transmission Price Weight Check Digit Add-ons 100 101 UCC/EAN 128 Emulation Disable/Enable GS1 DataBar OmnidirectionalGS1 DataBar Omnidirectional / Stacked Omnidirectional 102 GS1-128 Emulation Disable/Enable GS1 DataBar ExpandedGS1 DataBar Expanded / Expanded Stacked 103 Length Control 104 105 Coupon Read Control This feature controls coupon reading106 GS1 DataBar Limited Disable/Enable GS1 DataBar Limited107 Code Disable/Enable CodeFollowing options apply to the Code 39 symbology Check Character Calculation Start/Stop Characters Check Character Transmit109 Code 39 Full Ascii 110 111 Code 39 Length 1, Length 2 Programming Instructions 112 Code 32 Italian Pharmacode Disable/Enable Code 32 Italian Pharmacode113 Code 32 Italian Pharmacode 114 Following options apply to the Code 128 symbology Disable/Enable EAN115 Transmit Function Characters 116 117 Code 128 Conversion to Code Enables/disables expansion of Code 128 labels to CodeCode 128 Length 1, Length 2 Programming Instructions 118 Check Digit Calculation Disable/Enable Interleaved 2Interleaved 2 119 Check Digit Transmit 120 121 122 Codabar Disable/Enable CodabarFollowing options apply to the Codabar symbology Check Character Verification 124 125 Codabar Length 1, Length 2 Programming Instructions 126 Start/Stop Character Transmission Start/Stop Character Type127 Start/Stop Character Match 128 Following options apply to the Code 93 symbology 129 130 Code 93 Length 1, Length 2 Programming Instructions 131 132 2D Symbologies 133 134 Length Control 135 136 137 138 0350 139 Datamatrix Disable/Enable Datamatrix140 Datamatrix 141 Datamatrix Length 1, Length 2 Programming Instructions 142 QR Code Disable/Enable QR CodeWhen disabled, the scanner will not read QR Code labels 143 QR Code 144 QR Code Length 1, Length 2 Programming Instructions 145 Maxicode Disable/Enable MaxicodeWhen disabled, the scanner will not read Maxicode labels 146 Maxicode 147 Maxicode Length 1, Length 2 Programming Instructions 148 Aztec Disable/Enable AztecWhen disabled, the scanner will not read Aztec labels 149 Aztec 150 Aztec Length 1, Length 2 Programming Instructions 151 Composite Labels Disable/Enable GS1 DataBar Omnidirectional 2D ComponentDisable/Enable GS1 DataBar Expanded 2D Component 152 Disable/Enable GS1 DataBar Limited 2D Component 153 154 Inverse Label Reading 155 156 Optical and Read Performance Parameters Scanner Dimensions157 Environmental Parameters Physical PropertiesElectrical Parameters Other Parameters 159 160 Cable Pinouts Handheld Scanner Attached via the Aux Port Standard Cable Pinouts Primary Interface Cables161 162 163 164 Factory Defaults by Interface 165 166 167 AIM ID 168 Isbn 169 170 Table E-1. Keyboard Model Cross Reference Keyboard Model Cross Reference171 Table E-2. USB Function Key Usage Map 172 Table E-4. Scanset 2 Function Key Map Table E-3. Scanset 1 Function Key Map173 Table E-5.Scanset 3, 102-Key Function Key Map 174 Table E-6. Scanset 3 122-Key Function Key Map 175 Table E-7. Japanese DOS Function Key Map 176 Table E-8. NEC 9801-Key Function Key Map 177 178 Scanner responds to the following RS-232 commands Accepting RS-232 Commands179 180 1D Symbol Samples 181 1D Symbol Samples 182 2D Sample Symbols 183 Composite Sample Symbols 184 Autorun File Processing MicroSDHC CompatibilityMicroSD Card Insertion/Removal Indication $END$ required From Scanner to microSD Card MicroSD Function SummaryMicroSD Function Details 186 Data includes scanner ID, statistics and scanner health Export Scanner Status to microSD card187 Cpld code load to the scanner From microSD Card to ScannerApplication code load to scanner 188 Configuration load to scanner 189 190 Ascii Chart Australia Japan