Datalogic Scanning 3200VSI manual LED and Beeper Indicators, Green LED Indications

Getting Started

LED and Beeper Indicators

The scanner’s beeper sounds and its green LED illuminates to indicate various functions or errors on the scanner. The tables below list these indications. One exception to the behaviors listed in the tables is that the scanner’s functions are programmable, and may or may not be turned on. For example, certain indications, such as the power-up beep can be disabled using programming bar code labels.

Green LED Indications

LED	INDICATION	COMMENT
INDICATION
Power-on	Bright green flash	Indicates the scanner has finished all its power up tests and is
indication		now ready for operation.
Good Read	Bright green flash	Indicates a bar code has been read and decoded.
Indication
Scanner Ready	Constant dim green	The scanner is ready for operation. The LED is also configu-
		rable to off when idle and ready for operation
	Green LED slowly and continu-	The scanner is in Sleep Mode. To wake the scanner up, move
		an object in front of its window or press the button atop the
Sleep Mode	ously changes from off to dim to
		unit. This indication is optionally configurable and may have
	off.
		been programmed to behave differently.
Host Disable	Constant green flash at 1 Hz	The scanner is disabled due to receiving a disble command
	(100mS on, 900mS off)	from the POS terminal.
Diagnostics	Varies (see Error Codes on	The LED can provide diagnostic feedback if the scanner dis-
	page 3 for more information)	covers a problem during SelfTest.
Prog. Mode	See Host Disable above.	The scanner is in Programming Mode.

6 MagellanTM 3200VSi