Lantronix XPress DR+ manual Server Configuration, Static IP Address Configuration, Default Gateway

Chapter 6: Configuration Using Web Manager

Note: Disabling BOOTP, DHCP, and AutoIP (all three checkboxes) is not advised as the only available IP assignment method will then be ARP or the serial port.

5.When finished, click the OK button.

6.To save and reboot, click Apply Settings on the main menu.

Static IP Address Configuration

You manually assign an IP address to the unit and enter related network settings.

To assign an IP address manually:

1.On the main menu, click Network.

2.(Wireless units only) From the Network Mode drop-down list, select Wired Only or Wireless Only to set the unit for wired or wireless use.

3.Select Use the following IP configuration.

4.Enter the following (as necessary):

IP Address	Enter the IP address manually in decimal-dot notation. The IP
	address must be set to a unique value in the network.
Subnet Mask	A subnet mask defines the number of bits taken from the IP
	address that are assigned for the host part.
Default Gateway	The gateway address, or router, allows communication to
	other LAN segments. The gateway address should be the
	IP address of the router connected to the same LAN segment
	as the unit. The gateway address must be within the local
	network.

5.When finished, click the OK button.

6.To save and reboot, click Apply Settings on the main menu.

Server Configuration

The unit’s server values display when you select Server from the main menu. The following sections describe the configurable parameters on the Server Settings page.

XPress DR+ User Guide 48