Lantronix XPress DR+ Channel Configuration, Serial Settings, Retry Settings, Host Information

		Chapter 6: Configuration Using Web Manager
Retry Settings
	Retry Counter	Enter the value for the number of times the XPress DR+
		should attempt to retry connecting to the host list. The default
		setting is 3.
	Retry Timeout	Enter the duration (in seconds) the XPress DR+ should
		abandon attempting a connection to the host list. The default
		setting is 250.
Host Information
	Host Address	Enter or modify the host’s IP address.
	Port	Enter the target port number.

3.When finished, click the OK button.

4.To save and reboot, click Apply Settings on the main menu.

Channel Configuration

The Channel 1 and Channel 2 configurations define how the serial ports respond to network and serial communication.

Note: Channel 1 and Channel 2 have the same defaults except for the port number (10001 for Channel 1 and 10002 for Channel 2). The procedures below are for Channel 1; they are the same for Channel 2.

Serial Settings

To configure the channel’s serial settings:

1.On the main menu, click Serial Settings (below Channel 1) to display the Serial Settings window.

XPress DR+ User Guide 51