Lantronix XPress DR+ manual TX Data rate 0=fixed, 1=auto fallback 1 ?

Chapter 9: Setup Mode: Channel Configuration

Key Type	Encryption Key
	Passphrase input is not the same as ASCII input. The passphrase input is
	safer because it has up to 63 characters. ASCII input has a maximum of 5
	(WEP64) or 13 (WEP128) characters and limits the number of key
	combinations.

Please refer to the other equipment’s manual to determine the passphrase input style recommended.

Set the Encryption type to the minimum required security. The plus sign denotes that the group (broadcast) encryption method is different from the pairwise (unicast) encryption, in this case WEP and TKIP, respectively. For example, CCMP+TKIP => pairwise = CCMP, and group = TKIP.

WPA2/802.11i

The WPA2/802.11i mode complies with the Robust Secure Network specified in the IEEE standard 802.11i. It enables the AES-based strong CCMP encryption.

Enter key prompts for the new passphrase. Maximum length is 63 characters; the recommended minimum is 20 characters.

Set the Encryption type to minimum required security. The plus sign denotes that the group (broadcast) encryption method is different from the pairwise (unicast) encryption. For example, CCMP+TKIP => pairwise = CCMP, and group = TKIP.

Fixed or Automatic Data Rate

The XPress DR+W permits the control of the transmission rate. Select 0 to set a fixed data rate, or select 1 to set an automatic fallback data rate. The default setting is 1 (auto).

TX Data rate 0=fixed, 1=auto fallback (1) ? _

Transmission Data Rate

If the above TX Data rate is set to fixed, the selected data rate is the XPress DR+W’s fixed transmission rate. If the above TX Data rate is set to auto, the selected data rate is the XPress DR+W’s maximum data rate. Lower data rates allow for larger distances. They may also be required when communicating with older devices. The default setting is 11 Mbps.

TX Data rate 0=1, 1=2, 2=5.5, 3=11

4=18, 5=24, 6=36, 7=54 Mbps (3) ? _

Note: The XPress DR+W’s maximum data rate cannot be selected when TX Data rate is set to auto fallback.

XPress DR+ User Guide 86