Lantronix XPress DR+ manual Next Steps, Transmission Data Rate

Chapter 4: XPress DR+W

Transmission Data Rate

If the above TX Data rate is set to fixed, the selected data rate is the XPress DR+W’s fixed transmission rate. If the above TX Data rate is set to auto, the selected data rate is the XPress DR+W’s maximum data rate. Lower data rates allow for larger distances. They may also be required when communicating with older devices. The default setting is 11 Mbps.

TX Data rate 0=1, 1=2, 2=5.5, 3=11

4=18, 5=24, 6=36, 7=54 Mbps (0) ? _

Note: The unit’s maximum data rate cannot be selected when TX Data rate is set to auto.

Next Steps

1.Upon completing the IP and WLAN settings, select menu option 9 to save and exit the XPress DR+W Setup Mode.

2.To configure the XPress DR+W further, continue to Chapter 6: Configuration Using

Web Manager or Chapter 7: Configuration Using Telnet or Serial Port (Setup Mode).

XPress DR+ User Guide 40