Appendix B Lantronix Cables and Adapters | Lantronix XPress DR+

Appendix B: Lantronix Cables and Adapters

Lantronix P/N	Description
500-103	6’ RJ45-to DB9F

200.2062

Cable Ethernet CAT5; RJ45, 2 m (6.6 ft)

200.2063

Cable Ethernet CAT5; RJ45, 5 m (16.4 ft)

200.2064

Cable Ethernet CAT5; RJ45, 10 m (32.8 ft)

200.2065

Cable Ethernet CAT5; RJ45, 15 m (49.2 ft)

200.2066A	Adapter RJ45-to-DB25M

200.2067A	Adapter RJ45-to-DB25F

200.2069A	Adapter RJ45-to-DB9M

200.2070A	Adapter RJ45-to-DB9F

Applications

Included with XPress DR+ for setup or device connectivity.

Connects the RJ45 RS232 serial ports of XPress DR+ to a DB9M DTE interface of a PC or serial device.

Connects the XPress DR+ Ethernet ports to an Ethernet switch/hub or is used for cascading from one XPress DR+ to another.

Connects the XPress DR+ serial RJ45 RS232 ports to a device using one of the adapters listed below.

Connects the XPress DR+ Ethernet ports to an Ethernet switch/hub or is used for cascading from one XPress DR+ to another.

Connects the XPress DR+ serial RJ45 RS232 ports to a device using one of the below listed adapters.

Connects the XPress DR+ Ethernet ports to an Ethernet switch/hub or is used for cascading from one XPress DR+ to another.

Connects the XPress DR+ serial RJ45 RS232 ports to a device using one of the adapters listed below.

Connects the XPress DR+ Ethernet ports to an Ethernet switch/hub or is used for cascading from one XPress DR+ to another.

Connects the XPress DR+ serial RJ45 RS232 ports to a device using one of the adapters listed below.

Allows a standard straight-pinned CAT5 cable to connect the XPress DR+ RJ45 serial ports to the DB25F DCE interface of a serial device.

Allows a standard straight-pinned CAT5 cable to connect the XPress DR+ RJ45 serial ports to the DB25M DTE interface of a serial device.

Allows a standard straight-pinned CAT5 cable to connect the XPress DR+ RJ45 serial ports to the DB9F DCE interface of a serial device.

Allows a standard straight-pinned CAT5 cable to connect the XPress DR+ to the DB9M DTE interface of a PC or serial device.

XPress DR+ User Guide

105

Image 105

Lantronix XPress DR+ manual Appendix B Lantronix Cables and Adapters, Lantronix P/N Description, Applications

Contents

XPress DR+ User Guide Lantronix Corporate Headquarters Technical Support Sales OfficesDate Rev Comments Contents Using DeviceInstaller Configuration Using Web ManagerContents Configuration Using Telnet or Serial Port Setup Mode Setup Mode Server ConfigurationSetup Mode Channel Configuration Expert Settings Option 5 Setup Mode Advanced Settings Monitor Mode Firmware UpgradesTroubleshooting and Technical Support Appendix D Binary to Hexadecimal Conversions 108 Figures Appendix F Warranty 115 Index 116 Tables Purpose and Audience Using This GuideSummary of Chapters Chapter Description Additional Documentation Using This Guide Product Description Introduction XPress DR+ Front Introduction Network Protocols Serial Tunneling Industrial Automation Protocols Example of Serial Tunneling XPress DR+ Application Examples Hardware Address Addresses and Port NumbersIP Address Port Numbers Lantronix Web Manager. See Configuration Using Web Manager Configuration Methods Physically Connecting the XPress DR+ Installation and HardwareWhats in the Box? What Must the User Provide? XPress DR+ Front Panel Installation and Hardware Front of XPress DR+ Serial Interface RJ45 Serial Connector Pinouts Screw Terminal Serial ConnectorsSerial Screw Terminal Pinout for RS422 4-Wire Serial Screw Terminal Pinout for RS485 2-Wire DTE, 9-Pin XPress DR+ Female Serial RJ45 Pin RS-232 to Serial RJ45 Cable P/N Ethernet Interface Signals Typical RJ45 ConnectorEthernet Interface Power Requirements Reset SwitchMulti-Drop Ethernet Connections LEDs RXD Activity LED TXD Activity LED Ethernet Link LEDEthernet Activity LED Dimensions Status MeaningXPress DR+ LED Functions Product Information Label Wall Mount Bracket XPress DR+W Application ExamplesSerial Tunneling Network Ad Hoc Network Serial Tunneling InfrastructureXPress DR+W Ad Hoc XPress DR+W Connection Physically Connecting the XPress DR+W Front Panel Description Typical XPress DR+W Configuration XPress DR+W LED Functions Required Information for Initial Configuration Server Configuration Option Installing the XPress DR+W for Initial ConfigurationWlan Settings IP Address Subnet Mask Gateway BootP/DHCP/AutoIP options Network Mode XPress DR+W onlySet Gateway IP Address Options Bit Change Telnet Configuration Password Wlan Configuration OptionNetmask Number of Bits for Host Part Change Dhcp Device Name Topology Network Name SsidAdhoc Network Channel Key Type Encryption Key HexPassphrase WPA Fixed or Automatic Data Rate WPA2/802.11i Transmission Data Rate Next Steps Installing DeviceInstaller Using DeviceInstallerTo install DeviceInstaller Assigning an IP Address Viewing the Current Configuration Accessing the XPress DR+ Using DeviceInstallerUsing DeviceInstaller To view the units current settings Setting Description Pins Supports ConfigurableSupports Http Setup Supports Dynamic IP Configuration Using Web Manager Accessing XPress DR+ Using DeviceInstallerConfiguration Using Web Manager Lantronix Web Manager Network Configuration To assign an IP address automatically Automatic IP Address ConfigurationAutoIP Dhcp Host Name Static IP Address Configuration Server ConfigurationDefault Gateway To assign an IP address manually Server Configuration To configure the units device server settingsAdvanced Host List Configuration To configure the units host list0x77FE Server Port MTU Size Serial Settings Channel ConfigurationRetry Settings To configure the channel’s serial settings Channel Port Settings Pack Control Flush Input Buffer Serial to NetworkFlush Output Buffer Network to Serial To configure a channel’s TCP settings Connection Settings TCP Connect Mode Active Connection Connect Mode Passive ConnectionEndpoint Configuration Connect Protocol Disconnect Mode Connection Settings UDPTo configure a channel’s UDP settings Common Options Datagram Type Datagram Mode Device Address Table Wlan Configuration XPress DR+W only Wlan Settings Ad Hoc Network Type To configure the XPress DR+W’s Wlan settings Network Name Ssid Wireless Network ConfigurationNetwork Type Channel Wireless Network Security WEP OptionsWPA Options Applying Factory Defaults Applying SettingsAdvanced Settings WPA2/802.11i Options Accessing Setup Mode Configuration Using Telnet or Serial Port Setup Mode Configuration Using Telnet or Serial Port Setup Mode Serial Port ConnectionTo establish a Telnet connection To exit setup mode Exiting Setup Mode Setup Mode Server Configuration Setup Mode Server Configuration Dhcp Name Setup Mode Channel Configuration Channel 1 Option 1 and Channel 2 OptionBaudrate Setup Mode Channel Configuration Interface ModeMode Option Common I/F Mode Setting Binary Hex Port Number FlowFlow Control Option Hex Port Numbers Reserved for Connect Mode Option Connect Mode Incoming Connection ResponseActive Startup Autostart Automatic ConnectionHostlist To enable the hostlist Modem ModeDatagram Type Directed UDP Message Meaning Modem Mode Commands Modem Mode Function Command Send the Escape Sequence +++ in Modem Mode Auto Increment Source PortRemote IP Address Disconnect Mode Options Disconnect Mode OptionRemote Port DisConnMode Flush Mode Buffer Flushing Pack ControlOption Packing Interval DisConnTime Inactivity TimeoutTrailing Characters Send Characters Wlan Settings XPress DR+W Only Channel Port PasswordSend Characters Telnet Terminal Type Topology 0=Infrastructure, 1=Adhoc 0 ? WEP WEP64 or 13 WEP128 bytes and limits the number of key TX Data rate 0=fixed, 1=auto fallback 1 ? Enable Power Management Expert Settings Option Setup Mode Advanced SettingsARP Cache timeout in seconds Disable Monitor Mode at bootup Enable alternate MAC Security Settings OptionSetup Mode Advanced Settings Http Port Number Disable Telnet Setup Disable SnmpDisable Tftp Firmware Upgrade Disable Port 77FE Hex Default Settings Option Security Settings Expert SettingsWlan Settings XPress DR+W only Topology AdHoc Network Name Using Tftp Graphical User Interface Firmware UpgradesObtaining Firmware Reloading Firmware ROM File Using Tftp Command Line Interface Firmware UpgradesTo recover firmware Firmware Upgrades Entering Monitor Mode Using the Serial Port Monitor ModeEntering Monitor Mode Using the Network Port Monitor Mode Commands Command Command Name Function Monitor ModeMonitor Mode Commands G0, G1, ....,Ge, Gf Response Meaning Command Response Codes Problems and Error Messages Troubleshooting and Technical SupportProblem/Message Reason Solution Problems and Error Messages Troubleshooting and Technical Support XPress DR+ User Guide 101 Technical Support Europe, Middle East, and Africa Technical Support XPress DR+ and XPress DR+W Specifications Appendix a Technical Specifications Appendix a Technical Specifications XPress DR+W Wireless SpecificationsCategory Ieee 802.11b/g Appendix B Lantronix Cables and Adapters Lantronix P/N DescriptionApplications AutoIP Appendix C Alternative Methods of Assigning an IP Address ARP and Telnet Appendix C Alternative Methods of Assigning an IP AddressTo assign a temporary IP address Converting Binary to Hexadecimal Appendix D Binary to Hexadecimal ConversionsConversion Table Scientific Calculator Appendix D Binary to Hexadecimal Conversions Declaration of Conformity Appendix E Compliance InformationElectromagnetic Emissions and Immunity XPress DR+ Emissions Immunity Appendix E Compliance Information RadioElectromagnetic Emissions and Immunity XPress DR+W XPress DR+W Regulatory Information USA Federal Communications Commission FCC NoticeCanada Industry Canada Notice Europe R&TTE Directive 99/5/EC, Wireless Notice Antenna NoticeExposure of Humans to RF Fields Australia & New Zealand Wireless Notice Appendix F Warranty Index