Lantronix XPress DR+ Automatic IP Address Configuration, To assign an IP address automatically

Chapter 6: Configuration Using Web Manager

Figure 6-2. Network Settings

Automatic IP Address Configuration

An IP address can be assigned automatically. You then enter related network settings.

To assign an IP address automatically:

1.On the main menu, click Network.

2.(Wireless units only) From the Network Mode drop-down list, select Wired Only or Wireless Only to set the unit for wired or wireless use.

3.Select Obtain IP address automatically.

4.Enter the following (as necessary):

BOOTP	Select Enable to permit the Bootstrap Protocol (BOOTP)
	server to assign the IP address from a pool of addresses
	automatically. Enable is the default setting.
DHCP	Select Enable to permit the Dynamic Host Configuration
	Protocol (DHCP) to assign a leased IP address to the XPress
	DR+ unit automatically. Enable is the default setting.
AutoIP	Select Enable to permit the XPress DR+ to generate an IP in
	the 169.254.x.x address range with a Class B subnet. Enable
	is the default setting.
DHCP Host Name	Enter the name of the host on the network providing the IP
	address.

XPress DR+ User Guide 47