Lantronix XPress DR+ Setup Mode Channel Configuration, Channel 1 Option 1 and Channel 2 Option

Chapter 9: Setup Mode: Channel Configuration

This chapter explains how to configure a serial port.

Notes:

‹Current values display in parenthesis.

‹You must enter some values in hexadecimal notation. (See Appendix D: Binary to Hexadecimal Conversions).

Channel 1 (Option 1) and Channel 2 (Option 2)

Note: Channel 1 and Channel 2 have the same defaults except for the port number (10001 for Channel 1 and 10002 for Channel 2).

Select Channel 1 (option 1) or Channel 2 (option 2) from the Change Setup menu to define how the serial port responds to network and serial communications. The following sections describe the configurable parameters within the Channel configuration menu.

Figure 9-1. Serial Port Parameters

Baudrate

The unit and attached serial device, such as a Programmable Logic Controller (PLC), must agree on a speed or baud rate to use for the serial connection. Valid baud rates are 300, 600, 1200, 2400, 4800, 9600 (default), 19200, 38400, 57600, 115200, and 230400 baud.

Baudrate (9600) ? _

XPress DR+ User Guide 69