Lantronix XPress DR+ manual Exiting Setup Mode, To exit setup mode

Chapter 7: Configuration Using Telnet or Serial Port (Setup Mode)

At this point, the screen display is the same as when you use a Telnet connection. To continue, go to step 3 in Telnet Connection above.

Exiting Setup Mode

To exit setup mode:

You have two options:

‹To save all changes and reboot the device, select option 9 Save and exit from the Change Setup menu. All values are stored in nonvolatile memory.

‹To exit the configuration mode without saving any changes or rebooting. Select option 8 Exit without save from the Change Setup menu.

XPress DR+ User Guide 65