Lantronix XPress DR+ Command Command Name Function, Monitor Mode Commands, S0, S1,...,Se, Sf

Chapter 12: Monitor Mode

Table 12-1. Monitor Mode Commands

Command	Command Name	Function
AT	ARP Table	Shows the unit’s ARP table entries.
G0, G1, ....,Ge, Gf	Get configuration	Gets a memory page of configuration information
	from memory page	from the device.
GC x.x.x.x	Get Configuration	Gets configuration of unit with IP address x.x.x.x as
		hex records (120 bytes).
GM	Get MAC address	Shows the unit's 6-byte MAC address.
NC	Network Connection	Shows the unit’s IP configuration.
NS	Network Status	Reports the status of the network interfaces,
		including negotiated parameters like speed/duplex
		for Ethernet or BSSID, encryption, and
		authentication for wireless interfaces.
PI x.x.x.x	Ping	Pings unit with IP address x.x.x.x to check device
		status.
QU	Quit	Exits diagnostics mode.
RS	Reset	Resets the unit’s power.
S0, S1,...,Se, Sf	Set configuration to	Sets a memory page of configuration information
	memory page	on the device.
SA	Scan	Initiates a wireless scan if the wireless interface is
		enabled at the time. Reports any stations found,
		including BSSID, SSID, and RSSI.
		If SA is followed by a string, that string is used to
		filter SSIDs before reporting.
		Note: If the BSS does not broadcast its SSID, only
		the BSSID and RSSI are returned.
SC x.x.x.x	Send Configuration	Sets configuration of unit with IP address x.x.x.x
		from hex records.
SS	Set Security record	Sets the Security record without the encryption key
		and length parameters. The entire record must still
		be written, but the encryption-specific bytes do not
		need to be provided (they can be null since they
		are not overwritten).
TT	TCP Connection	Shows all incoming and outgoing TCP connections.
	Table
VS x.x.x.x	Version	Queries software header record (16 bytes) of unit
		with IP address x.x.x.x.

Responses to some of the commands are in Intel Hex format.

Note: Entering any of the commands listed above generates one of the following command response codes

XPress DR+ User Guide 97