Lantronix XPress DR+ manual Connect Mode Option

Chapter 9: Setup Mode: Channel Configuration

Connect Mode

Connect Mode defines how the unit makes a connection, and how it reacts to incoming connections over the network.

ConnectMode (C0) ? _

Enter Connect Mode options in hexadecimal notation.

Note: All bit positions in the table that are blank represent “don’t care” bits, for that particular option, which can be set to either a 0 or 1 value.

Table 9-5. Connect Mode Options

Connect Mode Option	7	6	5		4	3	2	1	0
a) Incoming Connection
Never accept incoming	0	0		0
Accept with DTR Active	0	1		0
Always Accept	1	1		0

b) Response

Nothing (quiet)				0
Character response (C=connect,				1
D=disconnect, N=unreachable)
c) Active Startup
No active startup					0	0	0	0
With any character					0	0	0	1
With DTR Active					0	0	1	0
With a specific start character					0	0	1	1
Manual connection					0	1	0	0
Autostart					0	1	0	1
Hostlist	0	0	1	0
d) Datagram Type
Directed UDP					1	1	0	0
e) Modem Mode
No Echo			0	0		1	1
Data Echo & Modem Response			0	1		1	1	1
(Numeric)
Data Echo & Modem Response			0	1		1	1	0
(Verbose)

XPress DR+ User Guide 72