Local party number type (Unknown or International) [International]?
Are call-ins allowed on this interface [Y]?
Call-out redial attempts [2]?
Network emulation mode [N]?
Local party number
Specifies the destination’s Frame Relay address.
Valid Values:A 1 - 20 character string of decimal digits
Default Value: None
Local party numbering plan
Specifies the format of the party number. The numbering plan must
match that used by the FR network.
Valid Values:E.164 (ISDN) or X.121 (Data)
Default Value: E.164
Local party number type
Specifies the destination Frame Relay party number type. The
number type must match that used by the FR network.
Valid Values:International or Unknown
Default Value: International
Call-ins allowed
Specifies whether calls from unconfigured (orphan) SVCs are
allowed on this interface.
Call-out redial attempts
Specifies the number of call-out redial attempts that will be
performed for each SVC in case of a call-out timeout on this
interface.
Default Value:2
Network emulation mode
Specifies whether this SVC is in network emulation mode. It is used
for a back-to-back router configuration.
throttle-transmit-on-fecn
Enables the device to
throttle down
the transmission of packets in response
to a packet with a FECN bit set on. Use this parameter to minimize overall
FR network congestion whenever a congestion indication is received. It
causes the device to react to a FECN in the same way that it reacts to a
BECN.
List
Use the list command to display currently configured management and PVC
information.
Syntax:
list all
hdlc
lmi
permanent-virtual-circuits
protocol-address
Configuring Frame Relay Interfaces
Chapter31. Configuring and Monitoring Frame Relay Interfaces 419
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|