Monitoring PPP Interfaces (Talk 5)

The ATCP State ®elds are the same as those described under thelist control lcp command.

Common Network Number

Network number of the two ends of the point-to-point link. (You must statically con®gure both ends of the link to have the same network number.)

Local Node ID

Unique node number of the local end of the link.

Remote Node ID

Unique node number of the remote end of the link.

Example:

list control dncp

 

DNCP State:

Closed

Previous State:

Closed

Time Since Change:

2 hours, 2 minutes and 58 seconds

The DNCP state ®elds are the same as those described under thelist control lcp command.

Example:

list control osicp

 

OSICP State:

Closed

Previous State:

Closed

Time Since Change:

6 hours, 28 minutes and 32 seconds

The OSICP State ®elds are the same as those described under thelist control lcp command.Example of the List Control BVPC Command

Example:

list control bvcp

 

BVCP State:

Open

Previous State:

Ack Sent

Time Since Change:

403 hours, 49 minutes and 2 seconds

The BVCP State ®elds are the same as those described under thelist control lcp command.

Note: The command word bvcp and the acronym BVCP stand for the Banyan VINES Control Protocol (BVCP).

Example of the List Control ISRCP Command

Example:

list control isrcp

 

APPN ISRCP State:

Open

Previous State:

Ack Rcvd

Time Since Change:

1 hour, 48 minutes and 5 seconds

The APPN ISR control protocol (ISRCP) state ®elds are the same as those described under the list control lcp command.Example of the List Control

HPRCP Command

Example:

list control hprcp

 

APPN HPRCP State:

Open

Previous State:

Ack Rcvd

Time Since Change:

1 hour, 48 minutes and 10 seconds

The APPN HPR control protocol (HPRCP) state ®elds are the same as those described under the list control lcp command

Chapter 33. Con®guring and Monitoring Point-to-Point Protocol Interfaces 493

Page 529
Image 529
IBM SC30-3681-08 manual Common Network Number, Local Node ID, Remote Node ID, Example of the List Control Isrcp Command