IBM SC30-3681-08 manual Packet-Size, Conguring Token-Ring Network Interfaces

Con®guring Token-Ring Network Interfaces

Note: If the MAC address is 0, the default station address is used.

Syntax: list

Example:

list

Token-Ring configuration:

Packet size (INFO field): 2052

Speed:	16 Mb/sec
RIF Aging Timer:	120
Source Routing:	Enabled
MAC Address:	000000000000

Packet size

Size of the Token-Ring packet.

Speed Speed of the network.

RIF Aging Timer

Amount of time that the router holds the information contained in the

Routing Information Field (RIF).

Source Routing

Status of the source-routing feature, enabled or disabled.

MAC Address

Con®gured MAC address that was set with theset physical-addresscommand. If all zeros are displayed, the MAC address is the default address.

LLC

Use the LLC command to access the LLC con®guration environment. See ªLLC Con®guration Commandsº on page 235 for an explanation of each of these commands.

Syntax:

llc

Note: If APPN is not included in your router software load, you will receive the following message if you try to use this command:

LLC configuration is not available for this network.

The LLC con®guration environment is only available if APPN is included in the software load.

Packet-Size

Use the packet-sizecommand to change maximum packet-size for all Token-Ring networks. Enter the packet-sizecommand followed by the desired number of bytes.

Syntax:

packet-sizebytes

226MRS V3.2 Software User's Guide